SURFACE | CHARACTERISTIC | SUMMARY OF MANUFACTURING METHOD | APPLICATION |
NO.1 | Silvery white | Hot rolled to specified thickness | Do not need to have a glossy surface use |
lackluster |
NO.2D | Silvery white | After cold rolling, heat treatment and pickling are carried out | General material, deep material |
NO.2B | Gloss is stronger than No.2D | After No.2D treatment, the final light cold rolling is carried out through the polishing roller | The general material |
BA | As bright as a sixpence | No standard, but usually a bright annealed surface with high reflectivity. | Building materials, kitchen utensils |
NO.3 | Rough lapping | Grind with 100~200# (unit) strop tape | Building materials, kitchen utensils |
NO.4 | Intermediate grinding | Polished surface obtained by grinding with 150~180# strop abrasive tape | Building materials, kitchen utensils |
NO.240 | Fine lapping | Grinding with 240# strop abrasive tape | kitchenware |
NO.320 | Very fine grinding | Grinding was carried out with 320# strop abrasive tape | kitchenware |
NO.400 | The luster is close to BA | Use 400# polishing wheel to grind | General timber, building timber, kitchen appliances |
HL | Hairline grinding | Suitable particle material for hair stripe grinding (150~240#) with many grains | Building, construction material |
NO.7 | It's close to mirror grinding | Use a 600# rotary polishing wheel to grind | For art or decoration |
NO.8 | Mirror ultrafinish | The mirror is ground with a polishing wheel | Reflector, for decoration |