Alloy plate

Special specifications can be customized according to customer requirements, please contact us to explain separately!

Contact us
Alloy plate
Description
Specification
Images

Hastelloy alloy:

Hastelloyalloy (Hastelloyalloy) is mainly divided into B, C, G three series, it is mainly used for iron based Cr-Ni or CR-Ni-Mo stainless steel, non-metallic materials and other can not be used in strong corrosive media occasions.

Hastelloy

In order to improve the corrosion resistance and cold and hot processing properties of Hastelloy alloy, Hastelloy has made three major improvements, and its development process is as follows:

B Series: B→B-2(00Ni70Mo28)→B-3

C Series: C→C-276(00Cr16Mo16W4)→C-4(00Cr16Mo16)→C-22(00Cr22Mo13W3)→C-2000(00Cr20Mo16)

G Series: G→G-3 (00Cr22Ni48Mo7Cu) →G-30(00Cr30Ni48Mo7Cu)

The most widely used are second-generation materials N10665(B-2), N10276(C-276), N06022(C-22), N06455(C-4), and N06985(G-3).

DIN/ENUNS NoGeneric termComposition
2.4819N10276Hastelloy C-27657Ni-16Mo-16Cr-5Fe-4W-2.5Co-1Mn-0.35V-0.08Si-0.01C
2.461N06455Hastelloy C-465Ni-16Cr-16Mo-0.7Ti-3Fe-2Co-1Mn-0.08Si-0.01C
2.4602N06022Hastelloy C-2256Ni-22Cr-13Mo-3Fe-2.5Co-0.5Mn-0.35V-0.08Si-0.01C
2.4675N06200Hastelloy C-20059Ni-23Cr-16Mo-1.6Cu-0.08Si-0.01C
2.4665N06002Hastelloy X47Ni-22Cr-18Fe-9Mo-1.5Co-0.6W-0.1C-1mn-1Si-0.008B


Incoloy alloy:

IN/ENUNS NoGeneric termComposition
1.498S66286INCOLOY Alloy A28625Ni-15Cr-1.5Mo-2Ti-1Mg-0.03C

N08367INCOLOY Alloy 25-6HN25Ni-20Cr-6.3MO-0.25Cu-0.2N-0.01P-0.05S-0.01C
S31277INCOLOY Alloy 27-7Mo27Ni-22Cr-7.0Mo-1Cu-0.3N-0.01P-0.005S-0.01C
N08926INCOLOY Alloy 25-6Mo25Ni-20Cr-6.5Mo-1Cu-0.2N-1.0Mg-0.01P-0.005S-0.01C
2.446N08020INCOLOY Alloy 2036Ni-21Cr-3.5Cu2.5Mo-1Mn-0.01C
1.4563N08028INCOLOY Alloy 2832Ni-27Cr-3.5Mo-1Cu-0.01C
1.4886N08330INCOLOY Alloy 33035Ni-18Cr-2Mg-1SI-0.03C
1.4876N08800INCOLOY Alloy 80032Ni-21Cr-0.3~1.2(Al+Ti)0.02C
1.4876N08810INCOLOY Alloy 800H32Ni-21Cr-0.3~1.2(Al+Ti)0.08C
2.4858N08825INCOLOY Alloy 82542Ni-21Cr-3Mo-2Cu-0.8Ti-0.1AI-0.02C


Nickel alloy:

1. Nickel-based superalloy. The main alloying elements are chromium, tungsten, molybdenum, cobalt, aluminum, titanium, boron, zirconium and so on. Among them, chromium plays an anti-oxidation and anti-corrosion role, and other elements play a strengthening role. It has high strength, oxidation resistance and gas corrosion resistance at 650 ~ 1000℃, and is the most widely used and the highest high temperature strength alloy. It is used in the manufacture of high temperature components for aero engine blades and rocket engines, nuclear reactors, and energy conversion equipment.

2. Nickel-based corrosion resistant alloy. The main alloying elements are copper, chromium and molybdenum. It has good comprehensive properties and can withstand various acid corrosion and stress corrosion. The earliest application is nickel-copper alloy, also known as Monel alloy; In addition, there are nickel chromium alloy, nickel molybdenum alloy, nickel chromium molybdenum alloy and so on. Used in the manufacture of various corrosion-resistant parts.

3. nickel-based wear resistant alloy. The main alloying elements are chromium, molybdenum, tungsten, but also contain small amounts of niobium, tantalum and indium. In addition to wear resistance, its oxidation resistance, corrosion resistance, welding performance is good. It can be used as a coating material, which can be coated on the surface of other base materials by surfacing welding and spraying process.

4. Nickel-based precision alloy. Including nickel-based soft magnetic alloy, nickel-based precision resistance alloy and nickel-based electric heating alloy. The most commonly used soft magnetic alloy is about 80% nickel permalloy, its maximum permeability and initial permeability is high, coercivity is low, is an important core material in the electronics industry. The main alloying elements of nickel-based precision resistance alloy are chromium, aluminum and copper. This alloy has high resistivity, low resistivity temperature coefficient and good corrosion resistance, and is used to make resistors. Nickel-based electrothermal alloy is a 20% chromium nickel alloy with good oxidation resistance and corrosion resistance, and can be used for a long time at 1000 ~ 1100℃.

5. Nickel-based shape memory alloy. Nickel alloy containing 50 (at)% titanium. The recovery temperature is 70℃, and the shape memory effect is good. A small change in the proportion of nickel-titanium components can make the recovery temperature change in the range of 30 ~ 100℃. It is widely used in the manufacture of automatic opening structural parts used in spacecraft, self-stimulating fasteners used in aerospace industry, artificial heart motors used in biomedicine, etc.

DIN/ENUNS NoGeneric termComposition
2.406N02000Nickl20099Ni-0.15Fe-0.2Mn-0.1Si-0.1Cu-0.1C
2.4601N02201Nickl20199Ni-0.15Fe-0.2Mn-0.1Si-0.1Cu-0.01C
2.405N02270Nickl27099.9Ni-0.02Fe-0.001Mn-0.002Si-0.005Cu-0.01C


Titanium alloy:

ASTM/ASMEGBJISElement Content(wt%)Mechanical Properties
N,maxC,maxH,maxFe,maxO,maxOthersStrength Of ExtensionDuctility
Mpa,min%,min
Pure TitaniumGr.1TA1Class10.030.080.0150.20.18
24024
Gr.2TA2Class20.030.080.0150.30.2534520
Gr.3TA3Class30.050.080.0150.30.3545018
Gr.4TA4Class40.050.080.0150.50.455015
Titanium AlloyGr.5TC4Class600.050.080.0150.40.2AI:5.5-6.7589510
Ti-6A1-4VV:3.5-4.5
Gr.7TA9Class120.030.080.0150.30.25Pd:0.12-0.2534520
Gr.9TC2Class610.030.080.0150.250.15AI:2.5-3.562015
V:2.0-3.0
Gr.11TA9-1Class110.030.080.0150.20.18Pd:0.12-0.2524024
Gr.23TC4 ELIClass60E0.030.080.01250.250.13AI:5.5-6.582810


Monel alloy:

Monel 400 alloy (UNS N04400 or MCu-28-1.5-1.8 or Ni68Cu28Fe) is a nickel-based alloy material with good corrosion resistance in seawater, chemical solvents, ammonia sulfur chloride, hydrogen chloride, various acidic media such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, organic acid, alkaline media, salt and molten salt.

ASTM B 164 (rods, wires), ASTM B 564 (forgings), ASTM B 127 (plates, strips), ASTM B 165 (seamless tubes).

UNS NOINGREDIENTGENERIC TERMINGREDIENT
2.436N04400MONEL40063Ni-32Cu-1Fe-0.1C
2.4375N05500MONEL K-50063Ni-30Cr-1Fe-3Al-0.6Ti-0.1C


Inconel alloy:

Inconel alloyElement (mass percentage)
NiCrFeMoNbCoMnCuALTiSiCSPB
60072.014.0-17.06.0-10.0


1.00.5

0.50.150.015
61744.2-56.020.0-24.03.08.0-10.0
10.0-15.00.50.50.8-1.50.60.50.150.0150.006
62558.020.0-23.05.08.0-10.03.15-4.151.00.5
0.40.40.50.10.015
69059.530.09.2


0.350.010.02
0.350.0190.003
71850.0-55.517.0-21.0·2.8-3.34.75-5.51.00.350.2-0.80.65-1.150.30.350.080.0150.006
x-75070.014.0-17.05.0-9.0
0.7-1.21.01.00.50.4-1.02.25-2.750.50.080.01

Inconel material specifications

Inconel 600 solution strengthened.

Inconel 625 is acid resistant and has good weldability. The LCF version is commonly used for bellows. Hardware and components for the power, aerospace and chemical processing industries. Sheets, plates, bars and forgings.

Inconel 718γ is doubly reinforced and has good weldability. The preferred materials for cryogenic storage tanks, turbines, underground shafts and wellhead components are sheet, sheet and rod.

The Inconel X750 is commonly used in gas turbine components, including blades, seals and rotors.

Inconel907

Inconel909

Inconel706

Inconel617

Inconel751

Chromium-nickel increases aluminum content and increases fracture strength in the 1600°F range.

Inconel792

Chromel increases aluminum content to improve high-temperature corrosion, especially for gas turbines.

Inconel939

Chrome-nickel enhances gamma primes and improves weldability.

Inconel188

Chromel is easy to manufacture for commercial gas turbines and aerospace applications. Sheets, plates and bars are available.

Inconel690

Chromium-nickel low cobalt content, low resistivity, suitable for nuclear applications. Inconel713C

Chromium-nickel precipitation-hardened nickel-chromium base casting alloy.

Inconel230

Chromium-nickel is mainly used in power, aerospace, chemical processing and industrial heating industry, aerospace materials.


STANDARDWERK STOFF NRUNSGOSTAFNORJAPANBSENOR
InconeI6002.4816N06600мнжМц282,5-1,5NC15F E11MNCF600NA13Nicr15Feэи868
InconeI6012.4851N06601XH60BTNC23F eANCF601NA49Nicr23Feэи868
InconeI6172.4663N06617





InconeI6252.4856N06625XH75 мБТЮNC22 DNB4MNCF625NA21Nicr22M9Nbэи602
InconeI6902.4642N06690





InconeI7182.4668N07718





InconeI725·N07725





InconeIx-7502.4669N07750





Inconel alloys include:

Inconel 600: solid solution reinforcement

Inconel601

Inconel 625: Acid resistance, good weldability. The LCF version is commonly used for bellows.

Inconel 690: Low cobalt content and low resistivity for nuclear applications

Inconel 713C: Precipitation-hardened nickel-chromium base cast alloy Inconel 718: Gamma double prime reinforced with good weldability

Inconel 751: Increased aluminum content to increase fracture strength in the 1600 °F range

Inconel 792: Increased aluminum content to improve high-temperature corrosion performance, especially for gas turbines

Inconel 939: Gamma prime reinforced to improve weldability

Thickness:0.3-200mm
Width :40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length:2000mm, 2500mm, 3000mm, 5800mm,6000mm,12000mm,etc
Standard:ASTM,JIS, AISI, GB, DIN, EN
Surface:BA,2B,NO.1,NO.4,4K,HL,8K
CertificationISO, SGS
TechniqueCold Rolled, Hot Rolled
EdgeMill Edge  Slit Edge UNS No Generic term Composition

展示1.jpg

Related products

Message

Submit